Great Ideas for Refinished Hutch

Dec 26th

Refinished hutch – When renovating the finish of antique furniture, such as hutch, you can update the overall look of the piece by using a more contemporary finish or buying new hardware, or you can simply restore it to its original appearance. A wide range of combinations of stains and hardware can completely change the look of an antique piece of furniture to complement its decoration. When selecting the stains and the top protective layers, which come in glossy, matte and satin finishes, pick up what works for your taste.

Ideas For Painting An Old Hutch

Remove all refinished hutch doors, drawers and hardware from your cabin. Check the backs of the doors and the hinges to see what type of screwdriver you will need to remove the screws. Put all the hardware and screws aside in a safe place. Pour a small amount of varnish remover on a clean cloth. Rub the wood with the cloth and let the separator soak for about five minutes. Scrape the finish with a paint scraper, non-metallic brush or grade steel wool. If you find that some of the goal is to be stubborn, add more separators and let it penetrate the wood for about five minutes. Keep scrubbing until the end has completely disappeared.

12 Photos Gallery of: Great Ideas for Refinished Hutch

Image of: Black Refinished Hutch
Image of: Ideas For Painting An Old Hutch
Image of: Refinishing Old Hutch
Image of: Refinishing Hutch Ideas
Image of: Refinished Hutch Ideas
Image of: Refinishing A Corner Hutch
Image of: Refinish Hutch With Chalk Paint
Image of: Painted Hutches Buffets
Image of: Painted Hutch Ideas
Image of: Ideas For Refinishing Oak Cabinets
Image of: Painted Hutch Before And After
Image of: Ideas For Redoing An Old Hutch

Refinished hutch, mix 1/2 cup of trisodium phosphate in 1 cup of hot water. Rub the wood with this solution with a sponge or a non-abrasive cloth. Rinse the wood with a damp cloth and then let it air dry. Sand all surfaces of the cabin. Use a hand belt sander on all wide and flat surfaces and a sanding pad or sanding pad for hard to reach areas or any intricate engraving. Sand with 100-grit sandpaper to remove the remaining stain and minor damage, such as scratches or dents. Sweep the dust with a sticky rag, then sand the booth again with 220 grit sandpaper. Clean the booth with an antistatic cloth to get rid of the dust.

READ  Incredible Corner Hutch Cabinet and Decor